Difference between revisions of "Explore Starter Kit for AVR"
| (4 intermediate revisions by 2 users not shown) | |||
| Line 3: | Line 3: | ||
The Explore Starter Kit for AVR bundles everything that is required to get kick started for AVR development. It comes with [[Starter AVR USB]] development board and host of other component, that quickly help you learn the internal details of the MCU as well as experiment with external interfaces. | The Explore Starter Kit for AVR bundles everything that is required to get kick started for AVR development. It comes with [[Starter AVR USB]] development board and host of other component, that quickly help you learn the internal details of the MCU as well as experiment with external interfaces. | ||
}} | }} | ||
| + | [[File:Cart add.png|right|link=https://www.exploreembedded.com/product/Starter%20ATmega32%20AVR%20USB%20Development%20Kit]] | ||
[[File:Explorers_Starter_Kit_for_AVR.jpg|x450px|Fig 1: AVR Starter]] | [[File:Explorers_Starter_Kit_for_AVR.jpg|x450px|Fig 1: AVR Starter]] | ||
| − | <gallery> | + | <gallery mode="packed"> |
| − | + | File:DSC00818.JPG | |
| − | File: | + | File:DSC00822.JPG |
| − | File:AVR Starter USB 3d.JPG | + | File: DSC00825.JPG |
| − | + | File:AVR Starter USB With LCD 3d.JPG | |
</gallery> | </gallery> | ||
=Kit Includes= | =Kit Includes= | ||
| Line 16: | Line 17: | ||
*[[Starter_AVR_USB]] Development Board | *[[Starter_AVR_USB]] Development Board | ||
*LCD 16 x 2 | *LCD 16 x 2 | ||
| − | * | + | *Switches 12mm (x2) |
*LEDs 5mm x20 | *LEDs 5mm x20 | ||
*LED RGB x2 | *LED RGB x2 | ||
| Line 22: | Line 23: | ||
*Buzzer | *Buzzer | ||
*Relay | *Relay | ||
| + | *Pot 10K | ||
*DC Motor | *DC Motor | ||
*Light Dependent Resistor (LDR) | *Light Dependent Resistor (LDR) | ||
*Temperature Sensor (LM35) | *Temperature Sensor (LM35) | ||
| − | |||
*Transistor BC547 | *Transistor BC547 | ||
*Resistors: 1K, 10K (10 each) | *Resistors: 1K, 10K (10 each) | ||
*USB Cable 1 | *USB Cable 1 | ||
| − | *Jumper wires male to female | + | *Jumper wires male to female x15 |
*Breadboard | *Breadboard | ||
}} | }} | ||
Latest revision as of 16:41, 4 April 2015
The Explore Starter Kit for AVR bundles everything that is required to get kick started for AVR development. It comes with Starter AVR USB development board and host of other component, that quickly help you learn the internal details of the MCU as well as experiment with external interfaces.
Contents
Kit Includes
- Starter_AVR_USB Development Board
- LCD 16 x 2
- Switches 12mm (x2)
- LEDs 5mm x20
- LED RGB x2
- 7 Segment
- Buzzer
- Relay
- Pot 10K
- DC Motor
- Light Dependent Resistor (LDR)
- Temperature Sensor (LM35)
- Transistor BC547
- Resistors: 1K, 10K (10 each)
- USB Cable 1
- Jumper wires male to female x15
- Breadboard
Physical Features
- Dimensions: 70mm X 90mm
- 1.6mm Glass Epoxy, FR4 PCB
- Wave Soldered.
Downloads:
Setting up the XploreFlash Programmer
Step 1: Xplore flash is based on various opensource software, it requires avrdude. Avrdude is part of WinAVR GCC complier. Download and install it.
Step 2:To connect Development board with computer USB driver is required. Windows USB to UART Drivers for CP2102
- For Other Operating system please download from Silicon Labs website.
Step 3: Download and install XploreFlash GUI. (XploreFlash GUI is based on AVRDUDESS)
Step 4: Follow the steps on images below to flash the board.
Note: The GUI software will require .NET framework 2.0 or later please download and install it.
Support
For Questions, technical support and feedback about this product, do comment below!