Interrupts On Explore M3
Revision as of 17:37, 29 April 2016 by Explorer (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

In this tutorial we will discuss how to use the external interrupts on Explore M3.


Prerequisites

Please check this tutorial for detailed explanation on inbuilt Lpc1768 RTC module.
If you are doing it for the first time, then check the below links to setup the project for generating the .bin file.

  1. Keil4 Setup
  2. Keil5 Setup
  3. ARM GCC Setup
  4. Eclipse & ARM GCC Setup



EINTx Pins

LPC1768 has four external interrupts EINT0-EINT3.
Below table shows mapping of EINTx pins.

Interrupt LPC1768 Pin Explore M3 pin Enum to be used
EINT0 P2.10 ISP EINT0 EINT1 P2.11 USB_BOOT EINT1 EINT2 P2_12 30 EINT2 EINT3 P2.13 31 EINT3



Hardware Connection

LED is Connected to pin 13 on Explore M3 board.


Code

Below is the sample code to blink the LED's with 1ms delay using systick timer.

Retrieved from "https://exploreembedded.com/wiki/index.php?title=Interrupts_On_Explore_M3&oldid=8495"