Explore Starter Kit for AVR Revision as of 17:40, 18 August 2014 by Sandeep (Talk | contribs) (diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Starter_AVR USB is introductory board for the AVR family of microcontrollers. The board has Atmega32 MCU with UART bootloader, hence no external programmer is required. Bootloader occupies approximates 2K Bytes of flash memory, remaining 30K Bytes can be used for user programming.

• 
• 
• 
• 

Kit Contains

• Starter_AVR_USB Development Board
• LCD 16 x 2
• Breadboard

Physical Features

• Dimensions: 70mm X 90mm
• 1.6mm Glass Epoxy, FR4 PCB
• Wave Soldered.

Downloads:

• Schematic
• Sample Code

Setting up the XploreFlash Programmer

Step 1: Xplore flash is based on various opensource software, it requires avrdude. Avrdude is part of WinAVR GCC complier. Download and install it.

Step 2:To connect Development board with computer USB driver is required. Windows USB to UART Drivers for CP2102

• For Other Operating system please download from Silicon Labs website.

Step 3: Download and install XploreFlash GUI. (XploreFlash GUI is based on AVRDUDESS)

Step 4: Follow the steps on images below to flash the board.

• 
• 
• 

Note: The GUI software will require .NET framework 2.0 or later please download and install it.

{{#seo: |title=AVR_Atmega32_Development_Boards |titlemode=append |keywords=Atmega32, AVR 32pin Development board, AVR Starter board. |description=AVR Development Boards }}

Support

For Questions, technical support and feedback about this product, do comment below!