Difference between revisions of "AT89S52 USB Starter Kit"
| Line 36: | Line 36: | ||
}} | }} | ||
==Programming Software== | ==Programming Software== | ||
| − | ==Setting up the XploreFlash Programmer== | + | ===Setting up the XploreFlash Programmer=== |
{{Box|type=l_green_light|text= | {{Box|type=l_green_light|text= | ||
Step 1: Xplore flash is based on various opensource software, it requires avrdude. Avrdude is part of WinAVR GCC complier. [http://sourceforge.net/projects/winavr/files/latest/download?source=files Download and install it.] | Step 1: Xplore flash is based on various opensource software, it requires avrdude. Avrdude is part of WinAVR GCC complier. [http://sourceforge.net/projects/winavr/files/latest/download?source=files Download and install it.] | ||
| Line 47: | Line 47: | ||
}} | }} | ||
| − | ==Alternate Software for flashing hex file: Prog ISP== | + | ===Alternate Software for flashing hex file: Prog ISP=== |
Download [https://dl.dropboxusercontent.com/u/2123459/Electrodragon/progisp1.72.rar progisp] | Download [https://dl.dropboxusercontent.com/u/2123459/Electrodragon/progisp1.72.rar progisp] | ||
Revision as of 21:12, 17 October 2014
8051 Starter Kit
8051 Starter USB Development kit is designed kick start your 8051 Development without any hassles. The Kit was made after a lot of thought on making it the best combination of easily available parts with minimal cost and great quality. Keeping in mind that this being used by hobbyists, learners and students there are chances of MCU going bad, hence we choose a low cost AT89S52, which is easily available at great price! Our intent was to make the kit complete in all aspects, ready to go!
Kit Contents
| Srl no | Item Description | Quantity |
| 1 | 8051 Starter USB Development board with AT89S52 MCU | 1 |
| 2 | USBasp Based AT89S Series Programmer | 1 |
| 3 | LCD 16 x 2 | 1 |
| 4 | DC 12V, 1A Power Adapter | 1 |
| 5 | 5X2 FRC Cable | 1 |
| 6 | USB A to B Cable | 1 |
| 7 | Female to Female Single pin connectors | 10 |
Downloads
Contents
USB Driver
- To connect Development board with computer USB driver is required.
Windows USB to UART Drivers for CP2102
- For Other Operating system please download from Silicon Labs website.
Schematic
8051 USB Development Board Schematic
Code Library
Programming Software
Setting up the XploreFlash Programmer
Step 1: Xplore flash is based on various opensource software, it requires avrdude. Avrdude is part of WinAVR GCC complier. Download and install it.
Step 2: Download and install USB driver for the programmer.
Step 3: Download and install XploreFlash GUI. (XploreFlash GUI is based on AVRDUDESS)
Step 4: Follow Step by step guide on using the programmer software XploreFlash program the micrcontroller. The GUI software will require .NET framework 2.0 or later please download and install it.
Alternate Software for flashing hex file: Prog ISP
Download progisp
Your comments motivate us to do better, your doubts and questions help us learn! Feel free to comment below