Revision as of 14:54, 24 April 2016

In this tutorial we will see how to blink the LED using the explore Embedded bare metal libraries.
Please check the below link for detailed explanation on LPC1768 GPIO's configuration.
LPC1768 GPIO Configuration

Project Setup

Check the below links to setup the project for generating the .bin file.

1. Keil4 Setup
2. Keil5 Setup
3. ARM GCC Setup
4. Eclipse & ARM GCC Setup

Hardware Connection

Similar to arduino the LED is connected to pin number 13.

Code

Below is the sample code the blink the LED connected at pin 13.

Demo