(Created page with "Category:Explore M3 Bare Metal In this tutorial we will see how to blink the LED using the explore Embedded bare metal libraries.<br> The libraries can be used on differen...")
 
 
(4 intermediate revisions by one other user not shown)
Line 1: Line 1:
 
[[Category:Explore M3 Bare Metal]]
 
[[Category:Explore M3 Bare Metal]]
In this tutorial we will see how to blink the LED using the explore Embedded bare metal libraries.<br>
+
In this tutorial we will see how read a switch and trun ON/OFF the LED/Buzzer/Relay using the explore Embedded bare metal libraries. The libraries can be used on different platforms like Keil, ARM GCC, GCC And Eclipse etc.<br><br>
The libraries can be used on different platforms like Keil, ARM GCC, GCC And Eclipse etc.<br><br>
+
  
  
Line 14: Line 13:
  
 
=Hardware Connection=
 
=Hardware Connection=
ExploreM3 comes with on board led connected to pin 13.
+
ExploreM3 comes with an USB_BOOT switch and on board led connected to pin 13.
 
<br><br><br>
 
<br><br><br>
  
 
=Code=
 
=Code=
Below is the sample code the blink the LED connected to pin 13.
+
Below is the sample code to read the switch status and turn ON/OFF the LED.
 
<html>
 
<html>
<script src="https://gist.github.com/SaheblalBagwan/22b56f0eb7a4ccad41411b8fad0ad435.js"></script>
+
<script src="https://gist.github.com/SaheblalBagwan/e72cbee37ab01b9a48e2ae4176b9f4eb.js"></script>
 
</html>
 
</html>
 
<br><br>
 
<br><br>
 
+
[[File:Lpc1768 Switch LED.gif]]
 
=Demo=
 
=Demo=

Latest revision as of 12:33, 5 May 2016

In this tutorial we will see how read a switch and trun ON/OFF the LED/Buzzer/Relay using the explore Embedded bare metal libraries. The libraries can be used on different platforms like Keil, ARM GCC, GCC And Eclipse etc.


Prerequisites

Please check this tutorial for detailed explanation on lpc1768 Gpio configuration.
If you are doing it for the first time, then check the below links to setup the project for generating the .bin file.

  1. Keil4 Setup
  2. Keil5 Setup
  3. ARM GCC Setup
  4. Eclipse & ARM GCC Setup



Hardware Connection

ExploreM3 comes with an USB_BOOT switch and on board led connected to pin 13.


Code

Below is the sample code to read the switch status and turn ON/OFF the LED.

Lpc1768 Switch LED.gif

Demo