Difference between revisions of "Starter AVR USB"
| Line 26: | Line 26: | ||
*Breakout for all Ports | *Breakout for all Ports | ||
*Breakout for +5v,Gnd and Vin | *Breakout for +5v,Gnd and Vin | ||
| − | *Power Supply compatible with AC/DC adapters. | + | *Power Supply compatible with AC/DC adapters(9 to 12V DC, 1A). |
}} | }} | ||
{{Box|type=blue_dark|text=Physical Features:}} | {{Box|type=blue_dark|text=Physical Features:}} | ||
Revision as of 10:29, 2 July 2014
 |
 |
Starter_AVR USB is introductory board for the AVR family of microcontrollers. The board has Atmega32 MCU with UART bootloader, hence no external programmer is required. Bootloader occupies approximates 2K Bytes of flash memory, remaining 30K Bytes can be used for user programming.
Features:
- Atmega32 MCU
- 32K bytes of In-System Self Programmable Flash Memory
- 1024 bytes EEPROM
- 2K bytes Internal SRAM
- 32 IO pins
- UART, SPI, JTAG and I2C support.
- Real Time Counter with Separate Oscillator
- Four PWM Channels**8-channel, 10-bit ADC
- 8 Single-ended Channels
- 2 Differential Channels with Programmable Gain at 1x, 10x, or 200x
- USB Interface CP2102: for communicating with the host computer.
- LCD Interface: 16 characters, 2 lines
- Test Leds (2) and Switches(2)
- 5X2 ISP Programmer Connector
- Breakout for all Ports
- Breakout for +5v,Gnd and Vin
- Power Supply compatible with AC/DC adapters(9 to 12V DC, 1A).
Physical Features:
- Dimensions: 70mm X 90mm
- 1.6mm Glass Epoxy, FR4 PCB
- Wave Soldered.
Downloads:
{{#seo: |title=AVR_Atmega32_Development_Boards |titlemode=append |keywords=Atmega32, AVR 32pin Development board, AVR Starter board. |description=AVR Development Boards }}