Line 41: Line 41:
 
[[FILE:UsbAsp Setup Steps 10.PNG]]  <br>
 
[[FILE:UsbAsp Setup Steps 10.PNG]]  <br>
  
<b>STEP 11:</b>
+
<b>STEP 12:</b>
 
[[FILE:UsbAsp Setup Steps 11.PNG]]  <br>
 
[[FILE:UsbAsp Setup Steps 11.PNG]]  <br>
  
Line 50: Line 50:
 
[[FILE:UsbAsp Setup Steps 13.PNG]]  <br>
 
[[FILE:UsbAsp Setup Steps 13.PNG]]  <br>
  
<b>STEP 15:</b>
+
=Using XploreFlash(AVR Dudes)=
 +
 
 +
<b>STEP 1:</b>
 +
[[File:XploreFlash 01.PNG ]]  <br>
 +
 
 +
<b>STEP 2:</b>
 +
[[File:XploreFlash 02.PNG]]  <br>
 +
 
 +
<b>STEP 3:</b>
 +
[[File:XploreFlash 03.PNG]]  <br>
 +
 
 +
<b>STEP 4:</b>
 +
[[File:XploreFlash 04.PNG]]  <br>

Revision as of 19:07, 26 June 2016

In this tutorial, we will see how to use XploreFlash for flashing the hex files to AT89s52.
First, we will see how to install the XploreFlash software along with UsbAsp drivers and then continue with flashing the controller.

Installing UsbAsp Drivers

Download the UsbAsp drivers from this link and follow the below steps.
In case your are using Windows7/Vista/Xp, skip the first 4 steps and directly jump to step5.

Windows 8 and above do not allow the installation of drivers that are not digitally signed. This needs to be disabled by follows the below steps.
STEP 1: UsbAsp Setup Steps.png

STEP 2: UsbAsp Setup Steps 1.png

STEP 3: UsbAsp Setup Steps 2.jpg

STEP 4: UsbAsp Setup Steps 3.jpg

STEP 5: UsbAsp Setup Steps 4.jpg

STEP 6: UsbAsp Setup Steps 5.jpg

STEP 7: UsbAsp Setup Steps 6.jpg

STEP 8: UsbAsp Setup Steps 7.PNG

STEP 9: UsbAsp Setup Steps 8.png

STEP 10: UsbAsp Setup Steps 9.PNG

STEP 11: UsbAsp Setup Steps 10.PNG

STEP 12: UsbAsp Setup Steps 11.PNG

STEP 13: UsbAsp Setup Steps 12.PNG

STEP 14: UsbAsp Setup Steps 13.PNG

Using XploreFlash(AVR Dudes)

STEP 1: File:XploreFlash 01.PNG

STEP 2: File:XploreFlash 02.PNG

STEP 3: File:XploreFlash 03.PNG

STEP 4: XploreFlash 04.PNG