(12 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
[[Category:8051 Development Boards]]
 
[[Category:8051 Development Boards]]
 +
[[File:Cart add.png|right|link=https://www.exploreembedded.com/product/Starter%20SST89E516RD%20USB%20Development%20board]]
 
{{Popup|type=l|text= ''This is latest 8051 Starter Development board from Explore Embedded, the board uses '''SST89E512RD''' Microcontroller which is '''100%''' compatible with '''P89V51RD2'''. The board has USB to Serial Convertor which can be used to program/flash the MCU; eliminates need for a programmer. It can used with laptops as well!''}}
 
{{Popup|type=l|text= ''This is latest 8051 Starter Development board from Explore Embedded, the board uses '''SST89E512RD''' Microcontroller which is '''100%''' compatible with '''P89V51RD2'''. The board has USB to Serial Convertor which can be used to program/flash the MCU; eliminates need for a programmer. It can used with laptops as well!''}}
 +
[[File:DSC09000.JPG|x480px]]
 +
<gallery mode="packed">
 +
File:DSC09010.JPG
 +
File:DSC09023.JPG
 +
File:DSC01041.JPG
 +
</gallery>
 
{{Box|type=l_green_light|text = '''Features'''}}
 
{{Box|type=l_green_light|text = '''Features'''}}
 
{{Box|type=l_green_light|text = <br/>
 
{{Box|type=l_green_light|text = <br/>
*SST89E516RD Microcontroller with boot loader
+
*SST89E516RD Microcontroller with bootloader ''(no programmer needed)''
 
*CP2102 USB to Serial Convertor on board
 
*CP2102 USB to Serial Convertor on board
 
*16 x 2 LCD Interface
 
*16 x 2 LCD Interface
Line 9: Line 16:
 
*LEDs x2
 
*LEDs x2
 
*All Ports pins as breakout.
 
*All Ports pins as breakout.
*High quality FR4 PCB, wave soldered.
+
*High quality FR4 , wave soldered PCB.
 +
}}
 +
{{Box|type=l_green_light|text = '''SST89E516RD MCU Features'''}}
 +
{{Box|type=l_green_light|text = <br/>
 +
*1 KByte Internal RAM
 +
*Dual Block SuperFlash EEPROM– 64 KByte primary block +8 KByte secondary block
 +
*Support External Address Range up to 64KByte of Program and Data Memory
 +
*Three High-Current Drive Ports (16 mA each)
 +
*Three 16-bit Timers/Counters
 +
*Full-Duplex, Enhanced UART– Framing Error Detection– Automatic Address Recognition
 +
*Ten Interrupt Sources at 4 Priority Levels– Four External Interrupt Inputs
 +
*Programmable Watchdog Timer (WDT)
 +
*Programmable Counter Array (PCA)
 +
*Four 8-bit I/O Ports (32 I/O Pins) andOne 4-bit Port
 +
*Second DPTR register
 +
*Low EMI Mode (Inhibit ALE)
 +
*SPI Serial Interface
 +
*Standard 12 Clocks per cycle, the device has adoption to double the speed to 6 clocks per cycle.
 +
*TTL- and CMOS-Compatible Logic Levels
 +
*Brown-out Detection
 +
*Low Power Modes– Power-down Mode with External Interrupt Wake-up– Idle Mode
 +
}}
  
 +
=Downloads=
 +
{{Box|type=l_green_light|text = <br/>
 +
*[http://xplorelabz.com/wiki/images/a/a7/8051_USB_Development_Board.pdf 8051 USB Development Board Schematic]
 +
* [http://xplorelabz.com/wiki/images/d/d3/CP210x_VCP_Windows.zip Windows USB to UART Drivers for CP2102]
 +
*[http://exploreembedded.com/wiki/images/c/cb/EasyIAP_Rev_6.0.zip Programming Software: EasyIAP]
 +
*[http://exploreembedded.com/wiki/images/2/2c/Starter_x51_USB.zip Sample Code]
 +
}}
 +
=Setting up EasyIAP SW and programming the hex file=
 +
{{Box|type=l_green_light|text = <br/>
 +
*Connect the Board to the computer and install [http://xplorelabz.com/wiki/images/d/d3/CP210x_VCP_Windows.zip Windows USB to UART Drivers for CP2102].
 +
**Note: Power up the board with 7 to 12V, 1A adapter, the board does not power up from USB.
 +
*Note down the '''COM Port Number e.g. COM 2''' from device manager
 +
*[http://exploreembedded.com/wiki/images/c/cb/EasyIAP_Rev_6.0.zip Download EasyIAP] and install it.
 +
*Follow the steps in the pictures below to detect the board and flash the hex file
 
}}
 
}}
 +
[[File:7 Flash.JPG|framed|x400px|Follow steps in images below:]]
 +
<gallery>
 +
File:0_device manager.JPG
 +
File:1_Install SW.JPG
 +
File:3_setup.JPG
 +
File:4_connect.JPG
 +
File:5_Browse.JPG
 +
File:6_OK.JPG
 +
File:7 Flash.JPG
 +
</gallery>
 +
=8051 Video Tutorials=
 +
And that's not all watch this complete series of 8051 video tutorials, which we believe should definitely  help you build
 +
{{#widget:YouTube|playlist=PLRuRKN7_FVgtdXWWM-uosWYfmOFDp63dd|width=680}}
 +
{{DISQUS}}

Latest revision as of 18:41, 6 March 2015

Cart add.png

This is latest 8051 Starter Development board from Explore Embedded, the board uses SST89E512RD Microcontroller which is 100% compatible with P89V51RD2. The board has USB to Serial Convertor which can be used to program/flash the MCU; eliminates need for a programmer. It can used with laptops as well!
DSC09000.JPG

Features


  • SST89E516RD Microcontroller with bootloader (no programmer needed)
  • CP2102 USB to Serial Convertor on board
  • 16 x 2 LCD Interface
  • Switches x2
  • LEDs x2
  • All Ports pins as breakout.
  • High quality FR4 , wave soldered PCB.

SST89E516RD MCU Features


  • 1 KByte Internal RAM
  • Dual Block SuperFlash EEPROM– 64 KByte primary block +8 KByte secondary block
  • Support External Address Range up to 64KByte of Program and Data Memory
  • Three High-Current Drive Ports (16 mA each)
  • Three 16-bit Timers/Counters
  • Full-Duplex, Enhanced UART– Framing Error Detection– Automatic Address Recognition
  • Ten Interrupt Sources at 4 Priority Levels– Four External Interrupt Inputs
  • Programmable Watchdog Timer (WDT)
  • Programmable Counter Array (PCA)
  • Four 8-bit I/O Ports (32 I/O Pins) andOne 4-bit Port
  • Second DPTR register
  • Low EMI Mode (Inhibit ALE)
  • SPI Serial Interface
  • Standard 12 Clocks per cycle, the device has adoption to double the speed to 6 clocks per cycle.
  • TTL- and CMOS-Compatible Logic Levels
  • Brown-out Detection
  • Low Power Modes– Power-down Mode with External Interrupt Wake-up– Idle Mode

Downloads

Setting up EasyIAP SW and programming the hex file


  • Connect the Board to the computer and install Windows USB to UART Drivers for CP2102.
    • Note: Power up the board with 7 to 12V, 1A adapter, the board does not power up from USB.
  • Note down the COM Port Number e.g. COM 2 from device manager
  • Download EasyIAP and install it.
  • Follow the steps in the pictures below to detect the board and flash the hex file
Follow steps in images below:

8051 Video Tutorials

And that's not all watch this complete series of 8051 video tutorials, which we believe should definitely help you build {{#widget:YouTube|playlist=PLRuRKN7_FVgtdXWWM-uosWYfmOFDp63dd|width=680}}