In this tutorial we will see how to setup a keil project to generate .hex file for LPC1768

00 Lpc7168 Keil.png

Open the Keil software and select the New Microvision project from Project Menu as shown below.
Lpc1768 Keil 01.png

Browse to your project folder and provide the project name and click on save.
Lpc1768 Keil 02.png

Once the project is saved a new pop up “Select Device for Target” opens, Select the controller(NXP:LPC1768) and click on OK.
Lpc1768 Keil 03.png

Select the controller(NXP:LPC1768) and click on OK.
Lpc1768 Keil 04.png

As LPC1768 needs the startup code, click on Yes option to include the LPC17xx Startup file.

Lpc1768 Keil 05.png

Create a new file to write the program.
Lpc1768 Keil 06.png

Type the code or Copy paste the below code snippet.
Lpc1768 Keil 07.png

After typing the code save the file as main.c.
Lpc1768 Keil 08.png

Add the recently saved file to the project

. Lpc1768 Keil 09.png

Add the main.c along with system_LPC17xx.c.
Lpc1768 Keil 10.png

Build the project and fix the compiler errors/warnings if any.
Lpc1768 Keil 11.png

Code is compiled with nor errors. The .hex file is still not generated.
Lpc1768 Keil 12.png

Click on Target Options to select the option for generating .hex file.
Lpc1768 Keil 13.png

Set IROM1 start address as 0x0000.
Lpc1768 Keil 14.png

Enable the option to generate the .hex file

Lpc1768 Keil 15.png

.Hex file is generated after a rebuild. Lpc1768 Keil 16.png

Check the project folder for the generated .hex file.
Lpc1768 Keil 17.png