Amruta (talk) 11:24, 17 March 2015 (IST)
Basics
Code
#include "lpc17xx.h" // NXP Library containing all port abd register definations #include "stdutils.h" // Explore Embedded library #define LED 29 //P1.29 #define SWITCH 28 //P1.28 int main() { SystemInit(); LPC_PINCON->PINSEL3 = 0x00; // Configure Pin as GPIO util_BitSet(LPC_GPIO1->FIODIR,LED); // Set pin direction as output util_BitClear (LPC_GPIO1->FIODIR,SWITCH); // Set pin direction as input while(1) { if (util_IsBitCleared (LPC_GPIO1->FIOPIN,SWITCH)) // check if switch is pressed util_BitSet (LPC_GPIO1->FIOSET,LED); // turn on LED else util_BitSet (LPC_GPIO1->FIOCLR,LED); // turn off LED } }