Dtmf controlled robot using AVR
Revision as of 16:06, 5 February 2014 by Sandeep (Talk | contribs)

Introduction

In this tutorial we will see about building a simple dtmf controlled robot. Whenever we make a call, and press keys, dtmf tones are generated and transmitted. The tones can be easily decoded using a IC like MT8870. This enables a lot of possibilities for wireless control over mobile and telephone.

The Components

For this we will be using Xplore Robot Chasis as shown. The basic components would be

  • Xplore Robo Chasis
  • Xplore AVR Robo development board with Integrated DTMF
  • Battery Operated [BO] Motors for driving wheels
  • Castor as a free wheel.

The setup is shown in the pictures below.

Assembled Robot chasis with wheels and motors


...Assembly sequence <hovergallery maxhoverwidth=600 maxhoverheight=600> File:Wheel.JPG

Retrieved from "https://exploreembedded.com/wiki/index.php?title=Dtmf_controlled_robot_using_AVR&oldid=1033"