Difference between revisions of "Cp2102 Usb-to-Serial Driver Installation"
Line 6: | Line 6: | ||
<b>Step1:</b>Connect the USB2Serial breakout/Starter 8051 board to system using the USB cable. | <b>Step1:</b>Connect the USB2Serial breakout/Starter 8051 board to system using the USB cable. | ||
Open the device manager, now the device will be listed in other devices as proper drivers are not installed. | Open the device manager, now the device will be listed in other devices as proper drivers are not installed. | ||
− | [[FILE:Usb2Serial 01.png]] | + | [[FILE:Usb2Serial 01.png]] <br> |
<b>Step2:</b>Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option. | <b>Step2:</b>Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option. | ||
− | [[FILE:Usb2Serial 02.png]] | + | [[FILE:Usb2Serial 02.png]] <br> |
<b>Step3:</b>Browse and select the folder where the drivers are copied. | <b>Step3:</b>Browse and select the folder where the drivers are copied. | ||
− | [[FILE:Usb2Serial 03.png]] | + | [[FILE:Usb2Serial 03.png]] <br> |
<b>Step4:</b>Select this folder for installing the drivers. | <b>Step4:</b>Select this folder for installing the drivers. | ||
− | [[FILE:Usb2Serial 04.png]] | + | [[FILE:Usb2Serial 04.png]] <br> |
<b>Step4:</b>The below screen shot shows the successful installation of drivers. | <b>Step4:</b>The below screen shot shows the successful installation of drivers. | ||
− | [[FILE:Usb2Serial 05.png]] | + | [[FILE:Usb2Serial 05.png]] <br> |
<b>Step5:</b>Now the device will be listed under PORTS with unique serial port assigned. | <b>Step5:</b>Now the device will be listed under PORTS with unique serial port assigned. | ||
− | [[FILE:Usb2Serial 06.png]] | + | [[FILE:Usb2Serial 06.png]] <br> |
=Downloads= | =Downloads= |
Revision as of 10:37, 28 July 2016
In this tutorial we will see how to install the Cp2102 Usb to Serial Drivers.
Download the Usb2Serial drivers for this link and follow the below steps to install the Usb-To-Serial drivers.
Steps to Install the Drivers
Step1:Connect the USB2Serial breakout/Starter 8051 board to system using the USB cable.
Open the device manager, now the device will be listed in other devices as proper drivers are not installed.
Step2:Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option.
Step3:Browse and select the folder where the drivers are copied.
Step4:Select this folder for installing the drivers.
Step4:The below screen shot shows the successful installation of drivers.
Step5:Now the device will be listed under PORTS with unique serial port assigned.
Downloads
Cp2102 Usb to Serial drivers can be downloaded this link.
Have an opinion, suggestion , question or feedback about the article let it out here!