Difference between revisions of "Cp2102 Usb-to-Serial Driver Installation"
| Line 3: | Line 3: | ||
Download the Usb2Serial drivers for [https://github.com/ExploreEmbedded/CP2102-Usb2Serial-Drivers/archive/master.zip this link] and follow the below steps to install the Usb-To-Serial drivers. | Download the Usb2Serial drivers for [https://github.com/ExploreEmbedded/CP2102-Usb2Serial-Drivers/archive/master.zip this link] and follow the below steps to install the Usb-To-Serial drivers. | ||
| + | =Steps to Install the Drivers= | ||
Step1: Connect the USB2Serial breakout/Starter 8051 board to system using the USB cable. | Step1: Connect the USB2Serial breakout/Starter 8051 board to system using the USB cable. | ||
Open the device manager, now the device will be listed in other devices as proper drivers are not installed. | Open the device manager, now the device will be listed in other devices as proper drivers are not installed. | ||
| Line 21: | Line 22: | ||
Step2: Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option. | Step2: Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option. | ||
[[FILE:Usb2Serial 06.png]] | [[FILE:Usb2Serial 06.png]] | ||
| + | |||
| + | =Downloads= | ||
| + | Cp2102 Usb to Serial drivers can be downloaded [https://github.com/ExploreEmbedded/CP2102-Usb2Serial-Drivers/archive/master.zip this link]. | ||
| + | |||
| + | |||
| + | Have an opinion, suggestion , question or feedback about the article let it out here! | ||
| + | {{DISQUS}} | ||
Revision as of 09:16, 28 July 2016
In this tutorial we will see how to install the Cp2102 Usb to Serial Drivers.
Download the Usb2Serial drivers for this link and follow the below steps to install the Usb-To-Serial drivers.
Steps to Install the Drivers
Step1: Connect the USB2Serial breakout/Starter 8051 board to system using the USB cable.
Open the device manager, now the device will be listed in other devices as proper drivers are not installed.
Step2: Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option.
Step2: Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option.
Step2: Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option.
Step2: Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option.
Step2: Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option.
Downloads
Cp2102 Usb to Serial drivers can be downloaded this link.
Have an opinion, suggestion , question or feedback about the article let it out here!