Difference between revisions of "Cp2102 Usb-to-Serial Driver Installation"
| Line 1: | Line 1: | ||
[[Category:PIC Tutorials]] | [[Category:PIC Tutorials]] | ||
| − | In this tutorial we will see how to install the Cp2102 Usb to Serial Drivers. | + | In this tutorial we will see how to install the Cp2102 Usb to Serial Drivers.<br> |
Download the Usb2Serial drivers for [https://github.com/ExploreEmbedded/CP2102-Usb2Serial-Drivers/archive/master.zip this link] and follow the below steps to install the Usb-To-Serial drivers. | Download the Usb2Serial drivers for [https://github.com/ExploreEmbedded/CP2102-Usb2Serial-Drivers/archive/master.zip this link] and follow the below steps to install the Usb-To-Serial drivers. | ||
Revision as of 09:13, 28 July 2016
In this tutorial we will see how to install the Cp2102 Usb to Serial Drivers.
Download the Usb2Serial drivers for this link and follow the below steps to install the Usb-To-Serial drivers.
Step1: Connect the USB2Serial breakout/Starter 8051 board to system using the USB cable.
Open the device manager, now the device will be listed in other devices as proper drivers are not installed.
Step2: Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option.
Step2: Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option.
Step2: Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option.
Step2: Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option.
Step2: Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option.
