Difference between revisions of "Cp2102 Usb-to-Serial Driver Installation"
(11 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
[[Category:PIC Tutorials]] | [[Category:PIC Tutorials]] | ||
+ | [[Category:8051_tutorials]] | ||
+ | [[Category:Cp2102 Chip]] | ||
+ | [[Category:oneMicro PIC16F877A]] | ||
+ | [[Category:OneMicro PIC18F4520]] | ||
− | + | In this tutorial, we will see how to install the Cp2102 Usb to Serial Drivers.<br> | |
+ | Download the Usb2Serial drivers for [https://github.com/ExploreEmbedded/CP2102-Usb2Serial-Drivers/archive/master.zip this link] and follow the below steps to install the Usb-To-Serial drivers. | ||
+ | [[File:0Usb2Serial.png]]<br><br> | ||
− | [[FILE: | + | =Steps to Install the Drivers= |
+ | <b>Step1:</b>Connect the USB2Serial breakout/Starter 8051 board to system using the USB cable. | ||
+ | Open the device manager, now the device will be listed in other devices as proper drivers are not installed. | ||
+ | [[FILE:Usb2Serial 01.png]] <br> | ||
− | + | <b>Step2:</b>Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option. | |
+ | [[FILE:Usb2Serial 02.png]] <br> | ||
− | + | <b>Step3:</b>Browse and select the folder where the drivers are copied. | |
+ | [[FILE:Usb2Serial 03.png]] <br> | ||
− | + | <b>Step4:</b>Select this folder for installing the drivers. | |
+ | [[FILE:Usb2Serial 04.png]] <br> | ||
− | The | + | <b>Step4:</b>The below screen shot shows the successful installation of drivers. |
+ | [[FILE:Usb2Serial 05.png]] <br> | ||
− | + | <b>Step5:</b>Now the device will be listed under PORTS with unique serial port assigned. | |
− | + | [[FILE:Usb2Serial 06.png]] <br> | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | = | + | =Downloads= |
− | + | Cp2102 Usb to Serial drivers can be downloaded [https://github.com/ExploreEmbedded/CP2102-Usb2Serial-Drivers/archive/master.zip this link]. | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | |||
− | |||
− | + | Have an opinion, suggestion , question or feedback about the article let it out here! | |
− | + | {{DISQUS}} | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + |
Latest revision as of 13:51, 9 September 2016
In this tutorial, we will see how to install the Cp2102 Usb to Serial Drivers.
Download the Usb2Serial drivers for this link and follow the below steps to install the Usb-To-Serial drivers.
Steps to Install the Drivers
Step1:Connect the USB2Serial breakout/Starter 8051 board to system using the USB cable.
Open the device manager, now the device will be listed in other devices as proper drivers are not installed.
Step2:Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option.
Step3:Browse and select the folder where the drivers are copied.
Step4:Select this folder for installing the drivers.
Step4:The below screen shot shows the successful installation of drivers.
Step5:Now the device will be listed under PORTS with unique serial port assigned.
Downloads
Cp2102 Usb to Serial drivers can be downloaded this link.
Have an opinion, suggestion , question or feedback about the article let it out here!