Arduino Setup for Explore M3
Revision as of 12:37, 17 May 2016 by Sandeep (Talk | contribs)

This page is placeholder for adding Arduino IDE support for Explore M3. Since there could be a few changes on bootloader front etc till the board goes for crowdfunding, this will be updated later. Also with the new board management feature on Arduino, the board can be added with a simple URL for all major Operating Systems. So do check back later!

Select Explore M3.png

Installation using Arduino Board Manager

Manual Installation

Windows

  1. Download and install the Arduino IDE (1.6.5 or later).
  2. Download and extract the contents of repository inside Arduino>Hardware directory of your Arduino Installation. Usually found under Documents>Arduino>Hardware. Verify that the directory structure looks like C:\Users\myPC\Documents\Arduino\hardware\Explore-M3
  3. Install the drivers following the steps outlined in this tutorial. (We plan to write a installer which will eliminate the need of these steps later.)
  4. Select the board as Explore M3 as shown below: Tools>Boards>Explore M3
Retrieved from "https://exploreembedded.com/wiki/index.php?title=Arduino_Setup_for_Explore_M3&oldid=8980"