Basics

Timer/Counter Unit

Timers come in handy when you want to set some time interval like your alarm. This can be very precise to a few microseconds. Timers/Counters are essential part of any modern MCU. Remember it is the same hardware unit inside the MCU that is used either as Timers or Counter. Timers/counters are an independent unit inside a micro-controller. They basically run independently of what task CPU is performing. Hence they come in very handy, and are primarily used for the following:

  • Internal Timer: As an internal timer the unit, ticks on the oscillator frequency. The oscillator frequency can be directly feed to the timer or it can be pre-scaled. In this mode it used generate precise delays. Or as precise time counting machine.
  • External Counter: In this mode the unit is used to count events on a specific external pin on a MCU.
  • Pulse width Modulation(PWM) Generator: PWM is used in speed control of motors and various other applications.

Timers/Counters in AVR

Timer 0

Timer 0.png

Timer 0 Registers

TCNT0: Timer/Counter Register 0

TCNT0
Timer/Counter 0
D7 D6 D5 D4 D3 D2 D1 D0

TCCR0: Timer/Counter Control Register

TCCR0
D7 D6 D5 D4 D3 D2 D1 D0
FOC0 WGM00 COM01 COM00 WGM01 CS02 CS01 CS00
D6 D3 PWM
WGM00 WGM01 Mode
0 0 Normal
0 1 CTC (Clear timer on compare match)
1 0 PWM (Phase correct)
1 1 Fast PWM

Timer 1

Timer 2