Cp2102 Usb-to-Serial Driver Installation
Revision as of 09:16, 28 July 2016 by Explorer (Talk | contribs)

In this tutorial we will see how to install the Cp2102 Usb to Serial Drivers.
Download the Usb2Serial drivers for this link and follow the below steps to install the Usb-To-Serial drivers.

Steps to Install the Drivers

Step1: Connect the USB2Serial breakout/Starter 8051 board to system using the USB cable. Open the device manager, now the device will be listed in other devices as proper drivers are not installed. Usb2Serial 01.png

Step2: Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option. Usb2Serial 02.png

Step2: Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option. Usb2Serial 03.png

Step2: Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option. Usb2Serial 04.png

Step2: Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option. Usb2Serial 05.png

Step2: Now right click on the Cp2102 Usb to UART Bridge Controller and select Update Driver Software option. Usb2Serial 06.png

Downloads

Cp2102 Usb to Serial drivers can be downloaded this link.


Have an opinion, suggestion , question or feedback about the article let it out here!

Retrieved from "https://exploreembedded.com/wiki/index.php?title=Cp2102_Usb-to-Serial_Driver_Installation&oldid=9926"