In this tutorial we will see how to setup a keil project to generate .bin file for LPC1768

Keil Setup Steps

Step1: Open the Keil software and select the New Microvision project from Project Menu as shown below.

Step2: Browse to your project folder and provide the project name and click on save.

Step3: Once the project is saved a new pop up “Select Device for Target” opens, Select the controller(NXP:LPC2148) and click on OK.

Step4: As LPC2148 needs the startup code, click on Yes option to include the Startup file.

Step5: Create a new file to write the program.

Step6: Type the code or Copy paste the below code snippet.

Step7: After typing the code save the file as main.c.

Step8: Add the recently saved file to the project.

Step9: Add the main.c to the project.

Step10: Build the project and fix the compiler errors/warnings if any.

Step11: Code is compiled with no errors. The .bin file is still not generated.

Setup Bin File Generation

Step13: Click on Target Options to select the option for generating .bin file.

Step14: Set IROM1 start address as 0x2000. Bootloader will be stored from 0x0000-0x2000 so application should start from 0x2000

Step15: Write the command to generate the .bin file from .axf file
Command: fromelf --bin KeilSetup.axf --output KeilSetup.bin

Step16: .Bin file is generated after a rebuild. Check the project folder for the generated .bin file.

After generating the .bin file check this tutorial for Uploading Bin files..

Have a opinion, suggestion , question or feedback about the article let it out here!