Uploading Hex File Using At89s52 ISP Programmer
Revision as of 13:24, 26 June 2016 by Explorer (Talk | contribs)

In this tutorial, we will see how to use XploreFlash for flashing the hex files to AT89s52.
First, we will see how to install the XploreFlash software along with UsbAsp drivers and then continue with flashing the controller.

Installing UsbAsp Drivers

Download the UsbAsp drivers from this link and follow the below steps.
In case your are using Windows7/Vista/Xp, skip the first 4 steps and directly jump to step5.

Windows 8 and above do not allow the installation of drivers that are not digitally signed. This needs to be disabled by follows the below steps.
STEP 1: File:UsbAsp Setup Steps .png

STEP 2: UsbAsp Setup Steps 1.png

STEP 3: UsbAsp Setup Steps 2.jpg

STEP 4: UsbAsp Setup Steps 3.jpg

STEP 5: UsbAsp Setup Steps 4.jpg

STEP 6: UsbAsp Setup Steps 5.jpg

STEP 7: UsbAsp Setup Steps 6.jpg

STEP 8: File:UsbAsp Setup Steps 7.png

STEP 9: UsbAsp Setup Steps 8.png

STEP 10: File:UsbAsp Setup Steps 9.png

STEP 11: File:UsbAsp Setup Steps 10.png

STEP 11: File:UsbAsp Setup Steps 11.png

STEP 13: File:UsbAsp Setup Steps 12.png

STEP 14: File:UsbAsp Setup Steps 13.png

STEP 15:

Retrieved from "https://exploreembedded.com/wiki/index.php?title=Uploading_Hex_File_Using_At89s52_ISP_Programmer&oldid=9400"