Setting Up FreeRTOS on Arduino
Revision as of 08:50, 3 May 2016 by Explorer (Talk | contribs)

In this tutorial we will see how to setup the Arduino IDE for FreeRTOS.
After setting up the IDE, we will run the first FreeRTOS example on Arduino Uno.




Setting Up

Arduino 1.6.8

Download and install the Arduino IDE from this link.
Now run the the IDE and go to Library Manager Sketch->Board->Board Manager.
Now search for FreeRTOS and select the latest version of FreeRTOS and click on Install.
ArduinoFreeRTOSSetup01.png

Once it is installed, Close and open the IDE and select Arduino Uno board
Open the first example from File->Examples->FreeRTOS823->01-TaskSwitching as shown in below image.
Compile and upload the code. Open the serial monitor and select 9600 baud rate.




http://www.freertos.org/a00111.html

Retrieved from "https://exploreembedded.com/wiki/index.php?title=Setting_Up_FreeRTOS_on_Arduino&oldid=8533"