Explore Atmega128 Breakout Revision as of 17:33, 12 March 2016 by Sharana (Talk | contribs) (diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Explore Atmega128 Breakout comes with bootloader, no external programmer is needed. USB to Serial is needed

Setting up the XploreFlash Programmer

Step 1: Xplore flash is based on various opensource software, it requires avrdude. Avrdude is part of WinAVR GCC complier. Download and install it.

Step 2:To connect Development board with computer USB driver is required. Windows USB to UART Drivers for CP2102

• For Other Operating system please download from Silicon Labs website.

Step 3: Download and install XploreFlash GUI (XploreFlash GUI is based on AVRDUDESS)

Step 4: Follow the steps on images below to flash the board.

• 
• 
• 
• 

Note: The GUI software will require .NET framework 2.0 or later please download and install it.

Downloads:

• Schematic
• Sample Code and Design Files