AVR Development Kit with USB Programmer

This kit is designed to prototype, test and build applications/projects on 28 pin and 40 pin AVR Microcontrollers like atmega8, atmega168, atmega328 etc and 40 pin AVR devices like atmega16, atmega32 etc. The Kit comes with a USB Programmer and host of interfaces!

Kit Contents

1.AVR Development board with All ICs
2.Microcontrollers: Atmega32, Atmega8
3.LCD 16x2
4. Seven Segments 4 numbers
5. RTC battery
6. Buzzer
7. Two Relays
8. Eight DIP Switch
9. Eight 5mm LEDs
10. 4 x 4 Keypad
11. Two Serial Ports
12. Temperature Sensor LM35
13. Power adapter 12V, 1A
14. Single pin female connectors: 20
15. Serial Cable
16. USB Cable
17. AVR USB Programmer

Setting up the XploreFlash Programmer

used to program both 8051 and AVR micrcontrollers.

Step 1: Xplore flash is based on various opensource software, it requires avrdude. Avrdude is part of WinAVR GCC complier. Download and install it.

Step 2: Download and install USB driver for the programmer.

Step 3: Download and install XploreFlash GUI. (XploreFlash GUI is based on AVRDUDESS)

Downloads and References

Ultra_AVR Development board Schematic

Sample Code: C code for all peripherals
Development board Product Manual

Purchase Online from our main site

If you've any questions, feedback, doubts, about this product please comment below

Demo videos on Ultra AVR Development Kit

{{#widget:YouTube|playlist=PLRuRKN7_FVgvtgEdOyc1LtL48xg5j4lYe|width=680}}

Video Tutorials for AVR

{{#widget:YouTube|playlist=PLRuRKN7_FVgvhdj6JmelCihl6jmKHc_Xt|width=680}}

AVR Development Kit Revision as of 14:13, 9 January 2015 by Sharana (Talk | contribs) (diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Contents