/* Let the motors run! Turns on an Motor on for Two second, then off for one second, repeatedly. */ // Pin 13 has an LED, also connected Motor. // give it a name: int led = 13; // the setup routine runs once when you press reset: void setup() { // initialize the digital pin as an output. pinMode(led, OUTPUT); } // the loop routine runs over and over again forever: void loop() { digitalWrite(led, HIGH); // turn the Motor on (HIGH is the voltage level) delay(2000); // wait for Two second digitalWrite(led, LOW); // turn the Motor off by making the voltage LOW delay(1000); // wait for a second