Timers On Explore M3 Revision as of 15:39, 29 April 2016 by Explorer (Talk | contribs) (diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

In this tutorial we are going to discuss the Timer module of Explore M3.
LPC1768 has four 32-bit timers, We will use Timer0 and Timer1 to generate a delay of 100ms, 500ms and blink the LEDs.

Prerequisites

Please check this tutorial for detailed explanation on inbuilt Lpc1768 RTC module.
If you are doing it for the first time, then check the below links to setup the project for generating the .bin file.

1. Keil4 Setup
2. Keil5 Setup
3. ARM GCC Setup
4. Eclipse & ARM GCC Setup

Hardware Connection

LEDs are Connected to 13 and 14.

Code

Below is the sample code to blink the LED's with 100ms and 500ms delay using timers.

Demo

Timer Delay measured using CRO.