AVR Development Kit Revision as of 11:09, 15 October 2014 by Sandeep (Talk | contribs) (diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

AVR Development Kit with USB Programmer

This kit is designed to prototype, test and build applications/projects on 28 pin and 40 pin AVR Microcontrollers like atmega8, atmega168, atmega328 etc and 40 pin AVR devices like atmega16, atmega32 etc. The Kit comes with a USB Programmer and host of interfaces!

Kit Contents

1. 1.AVR Development board with All ICs
   
2. 2.Microcontrollers: Atmega16, Atmega8
   
3. 3.LCD 16x2
   
4. 4. Seven Segments 4 numbers
   
5. 5. RTC battery
   
6. 6. Buzzer
   
7. 7. Two Relays
   
8. 8. Eight DIP Switch
   
9. 9. Eight 5mm LEDs
   
10. 10. 4 x 4 Keypad
    
11. 11. Two Serial Ports
    
12. 12. Temperature Sensor LM35
    
13. 13. Power adapter 12V, 1A
    
14. 14. Single pin female connectors: 20
    
15. 15. Serial Cable
    
16. 16. USB Cable
    
17. 17. AVR USB Programmer
    

Setting up the XploreFlash Programmer

used to program both 8051 and AVR micrcontrollers.

Step 1: Xplore flash is based on various opensource software, it requires avrdude. Avrdude is part of WinAVR GCC complier. Download and install it.

Step 2: Download and install USB driver for the programmer.

Step 3: Download and install XploreFlash GUI. (XploreFlash GUI is based on AVRDUDESS)

Downloads and References

Ultra_AVR Development board Schematic
Sample Code: C code for all peripherals
Development board Product Manual

Purchase Online from our main site

If you've any questions, feedback, doubts, about this product please comment below

Video Tutorials for AVR

{{#widget:YouTube|playlist=PLRuRKN7_FVgvhdj6JmelCihl6jmKHc_Xt|width=680}}