Explore POV Revision as of 16:54, 12 November 2014 by Sandeep (Talk | contribs) (diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

• 

  DIY Kit contains

• 

  Component Placement

The colorful Persistence Of Vision (POV) kit enables you to create colorful messages in air with just 8 LEDs. This kit is great introduction to soldering and AVR/Arduino Programming. The kit does not require a external programmer, it is self programmable with USB.

Solder it!

• Image below shows the layout of various components for the board. It is also printed on the PCB.

Component Layout

The image shows reference numbers for all the components.

• From the table below find out the exact part for the reference number.

Component List

ref	value	Item count
C1	4.7uF	1
C2	100nF	1
C3,C4	22pF	2
CON1	AVR-ISP-10	1
D1,D2	3.6V Zener	2
IC1	ATMEGA8-P	1
J1	USB_2	1
LED1..LED8	LED-RGB	8
P8	Batt	1
Q1..Q3	BC547	3
R1	2.2K	1
R2,R3	68E	2
R4	10K	1
R5..R12	220	8
R13..R15	1K	3
SW1	Boot	1
SW2	Reset	1
X1	12MHz	1

Programming

Pattern Generation

To create an image/patter, you can use the POV image maker application.