- Serial Communication with MAX232
- Eight 5mm LEDs
- Eight Switches in DIP package
- LCD 16x2
- Four Seven Segment Displays
- ADC 0808 with 555 timer for sampling frequency
- ULN 2803 Driver
- Two Relays for Switching AC devices.
- 4x4 Keypad
- L293D Motor Driver for DC and Stepper Motors
- DS1307 based Real Time Clock
- AT2404 EEPROM
2. USB Programmer for AT89S series micrcontrollers
3. Serial and USB cables.
4. Power Adapter
5. Single wire female connectors.
Setting up the XploreFlash Programmer
Step 2: To connect Development board with computer USB driver is required. Windows USB to UART Drivers for CP2102
- For Other Operating system please download from Silicon Labs website.
Step 3: Download and install XploreFlash GUI. (XploreFlash GUI is based on AVRDUDESS) The GUI software will require .NET framework 2.0 or later please download and install it if is not installed already.
Step 4: Follow Step by step guide on using the programmer software XploreFlash program the micrcontroller.
{{#seo: |title=8051_development_boards |titlemode=append |keywords=8051,AT89s51,at89c51,p89v51rd2,Xplorelabz,tutorials,basics,8051 boards,8051 board,8051 development kit,8051 kit, development kit |description=8051 development boards }}
If you've any issues in downloading and installing the software or doubts with the development board, please comment below for technical support.