We have designed this 8051 kit, so that a beginner can gradually build up from basics like LED blinking up to standard peripherals and communication protocols without having to change boards. We are shipping a USB AT89S series programmer with this board, for easy programming. The entire kit is very affordable and we are making tutorials to help you along.
Kit Contents:
1. 8051 Development Board with following Modules, ICs and Interfaces
- Serial Communication with MAX232
- Eight 5mm LEDs
- Eight Switches in DIP package
- LCD 16x2
- Four Seven Segment Displays
- ADC 0808 with 555 timer for sampling frequency
- ULN 2803 Driver
- Two Relays for Switching AC devices.
- 4x4 Keypad
- L293D Motor Driver for DC and Stepper Motors
- DS1307 based Real Time Clock
- AT2404 EEPROM
2. USB Programmer for AT89S series micrcontrollers
3. Serial and USB cables.
4. Power Adapter
5. Single wire female connectors.
Tutorials and Downloads:
Setting up the XploreFlash Programmer
Step 1: Xplore flash is based on various opensource software, it requires avrdude. Avrdude is part of WinAVR GCC complier. Download and install it.
Step 2: Download and install USB driver for the programmer.
Step 3: Download and install XploreFlash GUI. (XploreFlash GUI is based on AVRDUDESS)
Step 4: Follow Step by step guide on using the programmer software XploreFlash program the micrcontroller. The GUI software will require .NET framework 2.0 or later please download and install it.
