Reading Temperature with AVR Breakout Revision as of 11:31, 5 April 2016 by Nitish (Talk | contribs) (diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

In this tutorial we will set up and read the temperature from LM35 using ADC of Atmega32 AVR breakout.

Basics

Initially we will read a raw data from ADC. Atmega32 comes with 10-bit 8-channel inbuilt ADC. We will connect 10k Pot to channel 0, vary it and read the raw voltage. After that we will connect the LM35 temperature sensor to channel 0 and read the temperature as shown in Hook up. We will display the converted value on Terminal.
Refer Reading Temperature with AVR ADC for basics of Atmega32 ADC.