Contents
UART
UART_Init
| Defination | void UART_Init(uint32_t Baudrate) |
| Input Arguments |
uint32_t : Baudrate to be configured. |
| Return Value | none |
| Description | This function is used to initialize the UART at specified baud rate.If the requested baud rate is not within the supported range then the default baud rate of 9600 is set. |
| Usage |
UART_TxChar
| Defination | void UART_TxChar(char ch) |
| Input Arguments | Ascii value of the character to be transmitted. |
| Return Value | none |
| Description | This function is used to transmit a char through UART module. |
| Usage |
UART_RxChar
| Defination | char UART_RxChar() |
| Input Arguments | none. |
| Return Value | char: Ascii value of the character received |
| Description | This function is used to receive a char from UART module. It waits till a char is received and returns it after reception. |
| Usage |
UART_TxString
| Defination | |
| Input Arguments | |
| Return Value | |
| Description | |
| Usage |
UART_RxString
| Defination | |
| Input Arguments | |
| Return Value | |
| Description | |
| Usage |
UART_TxDecimalNumber
| Defination | |
| Input Arguments | |
| Return Value | |
| Description | |
| Usage |
UART_TxHexNumber
| Defination | |
| Input Arguments | |
| Return Value | |
| Description | |
| Usage |
UART_TxBinaryNumber
| Defination | |
| Input Arguments | |
| Return Value | |
| Description | |
| Usage |
UART_TxFloatNumber
| Defination | |
| Input Arguments | |
| Return Value | |
| Description | |
| Usage |
UART_Printf
| Defination | |
| Input Arguments | |
| Return Value | |
| Description | |
| Usage |