Difference between revisions of "Uploading Hex File Using At89s52 ISP Programmer"

(Created page with "Category:Starter 8051")
 
Line 1: Line 1:
 
[[Category:Starter 8051]]
 
[[Category:Starter 8051]]
 +
In this tutorial, we will see how to use XploreFlash for flashing the hex files to AT89s52.<br>
 +
First, we will see how to install the XploreFlash software along with UsbAsp drivers and then continue with flashing the controller.
 +
 +
=Installing UsbAsp Drivers=
 +
Download the UsbAsp drivers from this link and follow the below steps.<br>
 +
In case your are using Windows7/Vista/Xp, skip the first 4 steps and directly jump to step5.<br>
 +
 +
Windows 8 and above do not allow the installation of drivers that are not digitally signed. This needs to be disabled by follows the below steps.
 +
<b>STEP 1:</b>
 +
 +
<b>STEP 2:</b>
 +
 +
<b>STEP 3:</b>
 +
 +
<b>STEP 4:</b>
 +
 +
<b>STEP 5:</b>
 +
 +
<b>STEP 6:</b>
 +
 +
<b>STEP 7:</b>
 +
 +
<b>STEP 8:</b>
 +
 +
<b>STEP 9:</b>
 +
 +
<b>STEP 10:</b>
 +
 +
<b>STEP 11:</b>
 +
 +
<b>STEP 11:</b>
 +
 +
<b>STEP 13:</b>
 +
 +
<b>STEP 14:</b>
 +
 +
<b>STEP 15:</b>

Revision as of 12:19, 26 June 2016

In this tutorial, we will see how to use XploreFlash for flashing the hex files to AT89s52.
First, we will see how to install the XploreFlash software along with UsbAsp drivers and then continue with flashing the controller.

Installing UsbAsp Drivers

Download the UsbAsp drivers from this link and follow the below steps.
In case your are using Windows7/Vista/Xp, skip the first 4 steps and directly jump to step5.

Windows 8 and above do not allow the installation of drivers that are not digitally signed. This needs to be disabled by follows the below steps. STEP 1:

STEP 2:

STEP 3:

STEP 4:

STEP 5:

STEP 6:

STEP 7:

STEP 8:

STEP 9:

STEP 10:

STEP 11:

STEP 11:

STEP 13:

STEP 14:

STEP 15:

Retrieved from "https://exploreembedded.com/wiki/index.php?title=Uploading_Hex_File_Using_At89s52_ISP_Programmer&oldid=9385"