Difference between revisions of "Pic16f877a MPLABx Setup"
| Line 2: | Line 2: | ||
In this tutorial we will see how to setup a Mplabx project to generate .hex file for Pic16f877a<br><br> | In this tutorial we will see how to setup a Mplabx project to generate .hex file for Pic16f877a<br><br> | ||
| − | [[File: | + | [[File:Pic16F877A_MplabX_Setup0.png]]<br><br> |
=Keil Setup Steps= | =Keil Setup Steps= | ||
Revision as of 15:54, 22 April 2016
In this tutorial we will see how to setup a Mplabx project to generate .hex file for Pic16f877a
Keil Setup Steps
Step1: Open the Keil software and select the New Microvision project from Project Menu as shown below.
Step2: Browse to your project folder and provide the project name and click on save.
Step3: Once the project is saved a new pop up “Select Device for Target” opens, Select the controller(NXP:LPC1768) and click on OK.
Step4: Select the controller(NXP:LPC1768) and click on OK.
Step5: As LPC1768 needs the startup code, click on Yes option to include the LPC17xx Startup file.
Step6: Create a new file to write the program.
Step7: Type the code or Copy paste the below code snippet.
Step8: After typing the code save the file as main.c.
Step9: Add the recently saved file to the project.
Step10: Add the main.c along with system_LPC17xx.c.
Step11: Build the project and fix the compiler errors/warnings if any.
Step12: Code is compiled with no errors. The .hex file is still not generated.
Enable Hex File Generation
Step13: Click on Target Options to select the option for generating .hex file.
Step14: Set IROM1 start address as 0x0000.
Step15: Enable the option to generate the .hex file
Step16: .Hex file is generated after a rebuild.
Step17: Check the project folder for the generated .hex file.
Uploading the Hex file
After generating the .hex file check this tutorial for uploading Hex and Bin files.