Line 19: Line 19:
 
|-                                                               
 
|-                                                               
 
|AD3|| P0.26  || 0-GPIO, 1-AD0[3], 2-<b>AOUT </b>, 3-RXD3||20,21 bits of PINSEL1  
 
|AD3|| P0.26  || 0-GPIO, 1-AD0[3], 2-<b>AOUT </b>, 3-RXD3||20,21 bits of PINSEL1  
|} <br>
+
|}
 
$$DAC Output = (Vref * InputValue)/MAX_VALUE =  (3.3 * InputValue)/1023 = InputValue * 3.22 mv.$$
 
$$DAC Output = (Vref * InputValue)/MAX_VALUE =  (3.3 * InputValue)/1023 = InputValue * 3.22 mv.$$
 
<br><br>
 
<br><br>

Revision as of 18:28, 21 April 2016

Objective

In this tutorial we are going to discuss how to use the inbuilt LPC1768 DAC.
Finally we will see how to use the ExploreEmbedded DAC libraries.




LPC1768 DAC Module

Lpc1768 has in built DAC with following features.

  1. 10-bit digital to analog converter
  2. Resistor string architecture
  3. Buffered output
  4. Power-down mode
  5. Selectable speed vs. power
  6. Maximum update rate of 1 MHz.
Adc Channel Port Pin Pin Functions Associated PINSEL Register
AD3 P0.26 0-GPIO, 1-AD0[3], 2-AOUT , 3-RXD3 20,21 bits of PINSEL1

$$DAC Output = (Vref * InputValue)/MAX_VALUE = (3.3 * InputValue)/1023 = InputValue * 3.22 mv.$$

DAC Registers






Steps







Code