Difference between revisions of "LPC1768: External Interrupts"
| Line 26: | Line 26: | ||
=EINT Registers= | =EINT Registers= | ||
| − | Below table shows the registers associated with LPC1768 external interrupts. LPC1768 interrupts can be configured as edge/level triggered | + | Below table shows the registers associated with LPC1768 external interrupts. LPC1768 interrupts can be configured as edge/level triggered. |
| + | {| class="table table-striped table-hover table-condensed table-bordered" | ||
| + | |-class="info" | ||
| + | !Register || Description | ||
| + | |- | ||
| + | |PINSEL4|| To configure the pins as External Interrupts | ||
| + | |- | ||
| + | |EXTINT|| External Interrupt Flag Register | ||
| + | |- | ||
| + | |EXTMODE|| External Interrupt Mode register(Level/Edge Triggered) | ||
| + | |- | ||
| + | |EXTPOLAR|| External Interrupt Polarity(Falling/Rising Edge, Active Low/High) | ||
| + | |} | ||
| + | <br><br> | ||
Revision as of 19:54, 13 April 2016
Objective:
In this tutorial we will discuss how to configure and use the LPC1768 external interrupts(EINT0-EINT3).
At the end of tutorial we will see how to use the exploreembedded external interrupt library.
EINTx Pins
LPC1768 has four external interrupts EINT0-EINT3.
As LPC1768 pins are multi functional, these four interrupts are available on multiple pins.
Below table shows mapping of EINTx pins.
| Port Pin | PINSEL_FUNC_0 | PINSEL_FUNC_1 | PINSEL_FUNC_2 | PINSEL_FUNC_3 |
|---|---|---|---|---|
| P2.10 | GPIO | EINT0 | NMI | |
| P2.11 | GPIO | EINT1 | I2STX_CLK | |
| P2_12 | GPIO | EINT2 | I2STX_WS | |
| P2.13 | GPIO | EINT3 | I2STX_SDA |
EINT Registers
Below table shows the registers associated with LPC1768 external interrupts. LPC1768 interrupts can be configured as edge/level triggered.
| Register | Description |
|---|---|
| PINSEL4 | To configure the pins as External Interrupts |
| EXTINT | External Interrupt Flag Register |
| EXTMODE | External Interrupt Mode register(Level/Edge Triggered) |
| EXTPOLAR | External Interrupt Polarity(Falling/Rising Edge, Active Low/High) |