Difference between revisions of "2 -Read Switch and Display on LED"
Line 6: | Line 6: | ||
− | ''' | + | ''' Aim: ''' Blink the LED when the Switch Button is press |
Revision as of 18:45, 12 January 2015
Read Switch and Display on LED.
Aim: Blink the LED when the Switch Button is press
digital 2 is declared as the input port to read the values from the switch. digital 13 is the output LED for our board in this experiment
wait 0.1 is the delay timing
Our experiment can be resume as :
when Button is clicked forever when (if) digital 2 send the value 1 to the digital 13 , it receives it and ON the LED for 0.1 sec then OFF when it is released hence digital 13 receives 0 for 0.1 sec and it will keep repeating until stop is clicked