Line 3: Line 3:
 
==''Make Noise with Buzzer''==
 
==''Make Noise with Buzzer''==
 
    
 
    
   '''Objectif:''' Here the objectif is to make different types of noise on a timing
+
   '''Aim:''' Here the objectif is to make different types of noise on a timing
 
   
 
   
  

Latest revision as of 18:44, 12 January 2015


Make Noise with Buzzer

 Aim: Here the objectif is to make different types of noise on a timing

Arduino Interface buzzer.JPG


digital 13 is the output port for the buzzer in our board in this experiment
wait  is the delay time given


caption


Our experiment can be resume as :

when Button is clicked, (start) is broadcasted.
when the program receives  (start) , the signal is received throughdigital 13 , the buzzer then
emits  a beep sound for 1 sec  and stop for 1 sec during 5 times  
then change the beep sound with the delay time at 0.5 sec  for also 5 times.
again change it at 0.1 sec for  11 time so and so ...
etc...
Till the total repeating time has elapse.
while the program is executing if  the key s is press the program stop
when a is press again start  is broadcast to the program.