Difference between revisions of "AVR Library Usage Guide"
(Created page with "*''Below example demonstrates the step by step procedure to include the libraries into any applications.'' '''Step 1:''' ''Open the Avr AtmelStudio-6 and select the New projec...") |
|||
| Line 1: | Line 1: | ||
*''Below example demonstrates the step by step procedure to include the libraries into any applications.'' | *''Below example demonstrates the step by step procedure to include the libraries into any applications.'' | ||
'''Step 1:''' ''Open the Avr AtmelStudio-6 and select the New project from File Menu as shown below.'' | '''Step 1:''' ''Open the Avr AtmelStudio-6 and select the New project from File Menu as shown below.'' | ||
| − | [[File: | + | [[File:1Open_AvrAtmel.jpg]] |
| + | |||
| + | '''Step 2:''' ''Browse to your project folder and provide the project name and click on Ok.'' | ||
| + | [[File:2Give_ProjName.jpg]] | ||
| + | |||
| + | [[File:2.1Give_ProjName.jpg]] | ||
| + | |||
| + | [[File:2.2Give_ProjName.jpg]] | ||
| + | |||
| + | '''Step 3:''' ''Once the project is saved a new dialog box “Device Selection” opens, Select Atmega32 and click OK.'' | ||
| + | [[File:3Device_Selection.jpg]] | ||
| + | |||
| + | '''Step 4:''' ''Once the project is successfully created the below window opens with the initil .c file .''<br\> | ||
| + | ''Note:'' | ||
| + | *''The initial file name will be same as project name.'' | ||
| + | [[File:4Initial_CFile.jpg]] | ||
| + | |||
| + | '''Step 5:''' ''Write your program using the library functions and save it. | ||
| + | Note: Include the respective header files before calling any library functions. | ||
Revision as of 15:46, 5 December 2013
- Below example demonstrates the step by step procedure to include the libraries into any applications.
Step 1: Open the Avr AtmelStudio-6 and select the New project from File Menu as shown below. File:1Open AvrAtmel.jpg
Step 2: Browse to your project folder and provide the project name and click on Ok. File:2Give ProjName.jpg
Step 3: Once the project is saved a new dialog box “Device Selection” opens, Select Atmega32 and click OK. File:3Device Selection.jpg
Step 4: Once the project is successfully created the below window opens with the initil .c file .<br\> Note:
- The initial file name will be same as project name.
Step 5: Write your program using the library functions and save it. Note: Include the respective header files before calling any library functions.