Difference between revisions of "AVR Development Kit"
(→Downloads and References) |
|||
| Line 25: | Line 25: | ||
#17. AVR USB Programmer<br/> | #17. AVR USB Programmer<br/> | ||
}} | }} | ||
| + | ==Setting up the XploreFlash Programmer== | ||
| + | {{Box|type=l_green_light|text=<br /> | ||
| + | (used for both 8051 and AVR Micrcontrollers) | ||
| + | Step 1: Xplore flash is based on various opensource software, it requires avrdude. Avrdude is part of WinAVR GCC complier. [http://sourceforge.net/projects/winavr/files/latest/download?source=files Download and install it.] | ||
| + | |||
| + | Step 2: Download and install [http://www.fischl.de/usbasp/usbasp-windriver.2011-05-28.zip USB driver for the programmer.] | ||
| + | |||
| + | Step 3: Download and install [http://xplorelabz.com/wiki/images/e/ef/XploreFlash.zip XploreFlash GUI]. (XploreFlash GUI is based on AVRDUDESS) | ||
| + | |||
| + | |||
| + | |||
==Downloads and References== | ==Downloads and References== | ||
[http://xplorelabz.com/uploads/product_schematic/Ultra_AVR_schematic.pdf Ultra_AVR Development board Schematic]<br/> | [http://xplorelabz.com/uploads/product_schematic/Ultra_AVR_schematic.pdf Ultra_AVR Development board Schematic]<br/> | ||
Revision as of 21:23, 23 February 2014
Contents
AVR Development Kit with USB Programmer
This kit is designed to prototype, test and build applications/projects on 28 pin and 40 pin AVR Microcontrollers like atmega8, atmega168, atmega328 etc and 40 pin AVR devices like atmega16, atmega32 etc. The Kit comes with a USB Programmer and host of interfaces!
Kit Contents
- 1.AVR Development board with All ICs
- 2.Microcontrollers: Atmega16, Atmega8
- 3.LCD 16x2
- 4. Seven Segments 4 numbers
- 5. RTC battery
- 6. Buzzer
- 7. Two Relays
- 8. Eight DIP Switch
- 9. Eight 5mm LEDs
- 10. 4 x 4 Keypad
- 11. Two Serial Ports
- 12. Temperature Sensor LM35
- 13. Power adapter 12V, 1A
- 14. Single pin female connectors: 20
- 15. Serial Cable
- 16. USB Cable
- 17. AVR USB Programmer
Setting up the XploreFlash Programmer
{{Box|type=l_green_light|text=
(used for both 8051 and AVR Micrcontrollers)
Step 1: Xplore flash is based on various opensource software, it requires avrdude. Avrdude is part of WinAVR GCC complier. Download and install it.
Step 2: Download and install USB driver for the programmer.
Step 3: Download and install XploreFlash GUI. (XploreFlash GUI is based on AVRDUDESS)
Downloads and References
Ultra_AVR Development board Schematic
Sample Code: C code for all peripherals
Development board Product Manual
If you've any questions, feedback, doubts, about this product please comment below
{{#seo:
|title=AVR_Development_Boards
|titlemode=append
|keywords=AVR,AT89s51,at89c51,p89v51rd2,xplorelabz,tutorials,AVR development kit,AVR kit,Development kit,AVR Development Boards
|description=AVR Development Boards
}}