Difference between revisions of "Switch and a LED with AVR Breakout"
| Line 7: | Line 7: | ||
=Hook Up= | =Hook Up= | ||
| + | [[file:switch_AVRbreakout.png]] | ||
| + | |||
=Code= | =Code= | ||
<html> | <html> | ||
Revision as of 17:32, 4 April 2016
Now we will control the LED depending on external input. In this tutorial we will interface a switch to one of the port pin and display its status on LED connected to other port.
Contents
Basics
For this tutorial we will a connect a switch to PORT C0 and LED to PORT B0 of Atmega32. W will configure PORT A0 as input to read the switch status and PORT C0 as outputto display the switch status on LED. Initially LED will be ON , when we press switch the LED will be OFF.
Refer the AVR I/O Register Configuration tutorial for basics of GPIO register configuration.
Hook Up
Code