Difference between revisions of "Switch and a LED with AVR Breakout"
| Line 8: | Line 8: | ||
=Hook Up= | =Hook Up= | ||
=Code= | =Code= | ||
| + | <html> | ||
| + | <script src="https://gist.github.com/nitishshete/7252ffb1af5e6f29767ac68dc0123a67.js"></script> | ||
| + | </html> | ||
| + | |||
=Demo= | =Demo= | ||
=Downloads= | =Downloads= | ||
Revision as of 17:15, 4 April 2016
Now we will control the LED depending on external input. In this tutorial we will interface a switch to one of the port pin and display its status on LED connected to other port.
Basics
For this tutorial we will a connect a switch to PORT C0 and LED to PORT B0 of Atmega32. W will configure PORT A0 as input to read the switch status and PORT C0 as outputto display the switch status on LED. Initially LED will be ON , when we press switch the LED will be OFF.
Refer the AVR I/O Register Configuration tutorial for basics of GPIO register configuration.
Hook Up
Code
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #include <avr/io.h> | |
| #define LED 0 | |
| #define SWITCH 0 | |
| int main(void) | |
| { | |
| DDRB |= (1<<LED); // Configure PORTB as output to connect Led | |
| DDRC &= ~(1<<SWITCH); // Configure PORTC as input to connect switch | |
| PORTC |= 0x01; // Enable The PullUps of PORTC. | |
| while(1) | |
| { | |
| if(!PINC) | |
| PORTB &= ~(1<<LED); | |
| else | |
| PORTB |= (1<<LED); | |
| } | |
| return 0; | |
| } |