Difference between revisions of "Switch and a LED with AVR Breakout"
| Line 1: | Line 1: | ||
[[category:Atmega32 Breakout]] | [[category:Atmega32 Breakout]] | ||
Now we will control the LED depending on external input. In this tutorial we will interface a switch to one of the port pin and display its status on LED connected to other port. | Now we will control the LED depending on external input. In this tutorial we will interface a switch to one of the port pin and display its status on LED connected to other port. | ||
| + | =Basics= | ||
| + | For this tutorial we will a connect a switch to PORT A0 and LED to PORT C0 of Atmega32. W will configure PORT A0 as input to read the switch status and PORT C0 as outputto display the switch status on LED. | ||
| + | <br/> | ||
| + | Refer the [[AVR I/O Register Configuration]] tutorial for basics of GPIO register configuration. | ||
Revision as of 15:31, 4 April 2016
Now we will control the LED depending on external input. In this tutorial we will interface a switch to one of the port pin and display its status on LED connected to other port.
Basics
For this tutorial we will a connect a switch to PORT A0 and LED to PORT C0 of Atmega32. W will configure PORT A0 as input to read the switch status and PORT C0 as outputto display the switch status on LED.
Refer the AVR I/O Register Configuration tutorial for basics of GPIO register configuration.