We have designed this 8051 kit, so that a beginner can gradually build up from basics like LED blinking up to standard peripherals and communication protocols without having to change boards. We are shipping a USB AT89S series programmer with this board, for easy programming. The entire kit is very affordable and we are making tutorials to help you along.

1. 8051 Development Board with following Modules, ICs and Interfaces

• Serial Communication with MAX232
• Eight 5mm LEDs
• Eight Switches in DIP package
• LCD 16x2
• Four Seven Segment Displays
• ADC 0808 with 555 timer for sampling frequency
• ULN 2803 Driver
• Two Relays for Switching AC devices.
• 4x4 Keypad
• L293D Motor Driver for DC and Stepper Motors
• DS1307 based Real Time Clock
• AT2404 EEPROM

2. USB Programmer for AT89S series micrcontrollers
3. Serial and USB cables.
4. Power Adapter
5. Single wire female connectors.

Step 1: Xplore flash is based on various opensource software, it requires avrdude. Avrdude is part of WinAVR GCC complier. Download and install it.

Step 2: Download and install USB driver for the programmer.
Step 3: Download and install XploreFlash GUI. (XploreFlash GUI is based on AVRDUDESS) Note:If you're not able to download and install Xplore Flash, please download the PROGISP software.

Step 4: Follow Step by step guide on using the programmer software XploreFlash program the micrcontroller. The GUI software will require .NET framework 2.0 or later please download and install it.