Difference between revisions of "4 -Display colors with RGB LED"
Line 19: | Line 19: | ||
-when '''m''' is pressed the message '''stop''' is broadcasted which calls another function | -when '''m''' is pressed the message '''stop''' is broadcasted which calls another function | ||
to turn all LEDs '''OFF''' before to '''stop all scripts'''. | to turn all LEDs '''OFF''' before to '''stop all scripts'''. | ||
− | When '''p''' is pressed all three (3) | + | When '''p''' is pressed all three (3) colors will successively turn '''ON''' and '''OFF''' continually. |
'''''Notice''''' | '''''Notice''''' | ||
The LED is a common anode Led therefore when it receives '''0''' it will '''turn ON ''' and when it receives'''1''' will '''turn OFF''' | The LED is a common anode Led therefore when it receives '''0''' it will '''turn ON ''' and when it receives'''1''' will '''turn OFF''' |
Latest revision as of 20:49, 12 January 2015
Aim: Display RGB color with LED
Digital 11,12,13 are here defined as led output
The program starts when the green flag is pressed. -When the key a is pressed, the LED which is connected to the digital 11 will start blinking for 10 time with a 1 sec delay timing. -When key q is pressed the LED of digital 12 will in turn get activated for the same amount of time. -when m is pressed the message stop is broadcasted which calls another function to turn all LEDs OFF before to stop all scripts. When p is pressed all three (3) colors will successively turn ON and OFF continually.
Notice
The LED is a common anode Led therefore when it receives 0 it will turn ON and when it receives1 will turn OFF