Difference between revisions of "Explore POV"
| Line 211: | Line 211: | ||
==Pattern Generation== | ==Pattern Generation== | ||
To create an image/patterm, you can use the POV image maker application. | To create an image/patterm, you can use the POV image maker application. | ||
| − | [[ | + | [[Image:Maker.PNG|link=http://pov.exploreembedded.com/ImageMaker.html]] |
==Uploading the Pattern== | ==Uploading the Pattern== | ||
Revision as of 16:56, 12 November 2014
DIY Kit contains
Component Placement
The colorful Persistence Of Vision (POV) kit enables you to create colorful messages in air with just 8 LEDs. This kit is great introduction to soldering and AVR/Arduino Programming. The kit does not require a external programmer, it is self programmable with USB.
Contents
Solder it!
- Image below shows the layout of various components for the board. It is also printed on the PCB.
Component Layout
The image shows reference numbers for all the components.
- From the table below find out the exact part for the reference number.
Component List
ref value Item count C1 4.7uF 1 C2 100nF 1 C3,C4 22pF 2 CON1 AVR-ISP-10 1 D1,D2 3.6V Zener 2 IC1 ATMEGA8-P 1 J1 USB_2 1 LED1..LED8 LED-RGB 8 P8 Batt 1 Q1..Q3 BC547 3 R1 2.2K 1 R2,R3 68E 2 R4 10K 1 R5..R12 220 8 R13..R15 1K 3 SW1 Boot 1 SW2 Reset 1 X1 12MHz 1 Programming
Pattern Generation
To create an image/patterm, you can use the POV image maker application.
Uploading the Pattern
