Revision as of 11:58, 26 August 2014

Hack it like a arduino or build on it like an AVR. Integrated DTMF and Motor driver, will help you build you're next superbot with ease!

Features

Robotics board based on Atmega8 MCU.
Sensor shield to make line follower, light follower and obstacle avoidance robot.
Inbuilt DTMF decoder (MT8870) to make a Mobile controlled Robot
USB to UART convertor (CP2102) for communicating with computer, make a computer controlled Robot.
MCU with bootloader, no external programmer required.
Compatible with Arduino Software.

Package Contains

Electronics
- Robotics Board Based on Atmega8, with L293D driver and MT8870 DTMF Decoder
- Sensor Sheild for line, light and obstacle detecting robots
Mechanical
- Chasis(Red and White Basis)
- BO Motor Clamps
- DC BO Motors 150 RPM
- Wheels x2
- Castor Wheel
- Screws
- Battery Holder x2
Other
- USB Cable
- 5 Pin Sensor cable

Mechanical

Attaching BO Clamps to BO Motor

@@ Line 44: / Line 44: @@
-=Assembling the Robot=
+=Mechanical=
-==Mounting the BO Motor with Clamps==
+==Assembling the Robot==
+===Mounting the BO Motor with Clamps===
 [[File:Robo Wheel mouting 7.JPG|framed|Attaching BO Clamps to BO Motor]]
 <gallery>
@@ Line 56: / Line 57: @@
 </gallery>
-==Attaching Wheels to chasis==
+===Attaching Wheels to chasis===
 [[File:RF_Robo_Attaching_wheels_2.JPG]]
 <gallery>
@@ Line 65: / Line 66: @@
 </gallery>
-==Assembling the Base==
+===Assembling the Base===
 [[File:RF_Robo_Assembly_6.JPG]]
 <gallery>
@@ Line 73: / Line 74: @@
 File:RF_Robo_Assembly_4.JPG|Step 4
 </gallery>
+=Electronics=
 =Downloads=
 [http://exploreembedded.com/wiki/images/2/21/ExploreRobo_SampleCode.rar '''Code''']