(One intermediate revision by the same user not shown)
Line 15: Line 15:
 
==Workshop Outline==
 
==Workshop Outline==
 
===Day 1===
 
===Day 1===
 
+
*Setting up the required Software
 +
*Brief Introduction to Arduino IDE.
 +
*Basics of Robotics
 +
*Driving Motors
 +
*Reading Sensors
 +
*Transmitting Receiving Strings
 +
*Writing simple algorithms
 +
*Writing functions for Motor Control
 +
*Writing functions for Reading Sensors
 +
*Testing individual Hardware Components.
 +
*Assembling the Robot.
 +
*Testing algorithm for Computer controlled Robot.
  
 
===Day 2===
 
===Day 2===
 +
*Introduction to Interrupts
 +
*Using Interrupts to make Mobile DTMF controlled Robot
 +
*Introduction to light Sensors.
 +
*Building light follower Robot
 +
*Understanding working of IR Sensors.
 +
*Building a obstacle avoiding Robot
 +
*Building a line follower Robot
 +
====Session on how to re code everything in AVR C====
 +
===Question and Answers Session===
 +
{{DISQUS}}

Latest revision as of 14:10, 10 October 2014


Building Robotics with the Arduino Platform is not just simple, its fun! With this workshop we intend to build 5 basic robot types from scratch!

  • Line Follower
  • Obstacle avoidance
  • Light Follower
  • Computer controlled
  • Mobile DTMF controlled.

Demo Video

Check the video below for all that you'll be doing hands on in this workshop.

Workshop Outline

Day 1

  • Setting up the required Software
  • Brief Introduction to Arduino IDE.
  • Basics of Robotics
  • Driving Motors
  • Reading Sensors
  • Transmitting Receiving Strings
  • Writing simple algorithms
  • Writing functions for Motor Control
  • Writing functions for Reading Sensors
  • Testing individual Hardware Components.
  • Assembling the Robot.
  • Testing algorithm for Computer controlled Robot.

Day 2

  • Introduction to Interrupts
  • Using Interrupts to make Mobile DTMF controlled Robot
  • Introduction to light Sensors.
  • Building light follower Robot
  • Understanding working of IR Sensors.
  • Building a obstacle avoiding Robot
  • Building a line follower Robot

Session on how to re code everything in AVR C

Question and Answers Session