(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
[[Category:Starter 8051]]
 
[[Category:Starter 8051]]
 +
After setting up starter 8051 board, we will start with simple LED blinking experiment. On this board 4 LED's are connected to higher four bits of PORT 3.
 +
We will write the code in Keil Compiler, to setting up Keil compiler for 8051 refer the [[8051_Keil_Setup|8051 Keil Setup]] tutorial. After generating the hex file refer the tutorial to [[Uploading_Hex_File_Using_nuvoTon|uploading hex file using nuvoTon]].
 +
 +
==Hookup==
 +
[[File:8051 hookup.JPG|none]]
  
 
=Code=
 
=Code=
 
<html>
 
<html>
<script src="https://gist.github.com/sharanago/16048113a83ad744505631bc67fdefcc.js"></script>
+
<script src="https://gist.github.com/raghavendrahassy/ee9638f08b67bc6aee9337e6d43f5c29.js"></script>
 
</html>
 
</html>
 +
 +
== Demo ==
 +
 +
[[File:0Output 2un4ub.gif]]
 +
 +
= Downloads=
 +
Download the complete project folder from the below link:
 +
https://github.com/ExploreEmbedded/8051_ExploreStarter8051/archive/master.zip<br>
 +
 +
 +
 +
Have a opinion, suggestion , question or feedback about the article let it out here!
 +
{{DISQUS}}

Latest revision as of 18:51, 15 June 2016

After setting up starter 8051 board, we will start with simple LED blinking experiment. On this board 4 LED's are connected to higher four bits of PORT 3. We will write the code in Keil Compiler, to setting up Keil compiler for 8051 refer the 8051 Keil Setup tutorial. After generating the hex file refer the tutorial to uploading hex file using nuvoTon.

Hookup

8051 hookup.JPG

Code

Demo

0Output 2un4ub.gif

Downloads

Download the complete project folder from the below link: https://github.com/ExploreEmbedded/8051_ExploreStarter8051/archive/master.zip


Have a opinion, suggestion , question or feedback about the article let it out here!