Difference between revisions of "Reading Temperature with AVR Breakout"
| (One intermediate revision by the same user not shown) | |||
| Line 23: | Line 23: | ||
=Downloads= | =Downloads= | ||
| + | Download the complete project folder from the below link: | ||
| + | https://github.com/ExploreEmbedded/AVR-MCU-Breakout-Board/archive/master.zip<br> | ||
| + | |||
| + | |||
| + | |||
| + | Have a opinion, suggestion , question or feedback about the article let it out here! | ||
| + | {{DISQUS}} | ||
Latest revision as of 10:19, 20 April 2016
In this tutorial we will set up and read the temperature from LM35 using ADC of Atmega32 AVR breakout.
Basics
Initially we will read a raw data from ADC. Atmega32 comes with 10-bit 8-channel inbuilt ADC. We will connect 10k Pot to channel 0, vary it and read the raw voltage. After that we will connect the LM35 temperature sensor to channel 0 and read the temperature as shown in hook up. We will display the converted value on terminal.
Refer Reading Temperature with AVR ADC for basics of Atmega32 ADC and LM35 temperature sensor.
Hook Up LM35
Instead of LM35 temperature we can connect Pot to read the raw data from ADC.
Code to Read Voltage
Code to Read Temperature
To display the ADC value open the terminal connect the COM port, we will get output as shown in below image.
Downloads
Download the complete project folder from the below link:
https://github.com/ExploreEmbedded/AVR-MCU-Breakout-Board/archive/master.zip
Have a opinion, suggestion , question or feedback about the article let it out here!